Domov technika Roller conveyor belt

Roller conveyor belt



Roller conveyor

Roller conveyors

Type of roller conveyor:

①Roller diameter 19mm type;

②Roller 28mm diameter type;

③roller diameter 38mm type.

Selection method of roller conveyor

Select roller width

Choose the roller width according to the outer dimensions of the conveying object.

1. The width of the roller is most suitable for the width of the bottom surface of the conveying object +50mm or more.

2. When using pallets or similar methods to transport, even if the width of the roller is below the width of the bottom of the transported object, as long as the transported object does not touch the frame, there is no problem.

Select the wheelbase

The wheelbase depends on the length of the bottom surface of the conveying surface and the weight of the conveying object.

● When the bottom surface of the conveying object is hard

When conveying iron, plastic and other hard bottom objects, the selected wheel base must be 4 (3 wheel bases) or more Roller

to carry and transport objects.

● When the bottom surface of the conveying object is soft

When the conveying carton, rubber and other soft bottom surfaces may get stuck, the selected wheel base must be ensured with 6 (5

wheels above the wheelbase) to carry and convey objects. In addition, the strength of each roller must be below the strength of the roller as shown in the table below.

● When subjected to impact during transportation

When subjected to impact during transportation, the impact load can reach more than 1.5~3 times the normal load, so please choose sufficient

< p>Conveyor belt with enough transmission capacity.

Single roller strength list

< td>

588

Roller outer diameter\roller strength (N)

W113

W213

W313

W413

W513

19.1mm

618

530

343

294

< /td>

206

28.6mm

1236 p>

1059

687

588

412

38.1mm

1342

1342

922

785

③Select the self-propelled slope

If the roller conveyor belt is set to tilt, the conveying object will be Moving by its own weight. The slope at this time is called the self-propelled

slope. The self-propelled inclination will also change due to the bottom surface state, material, and weight of the conveying object.

Material attributes of roller conveyor belt:

Roller

Material

td>

Steel

Surface treatment

Chromate gloss treatment

Bearing

Material

< /td>

Steel

Frame

Material

Steel

Surface treatment

※ZAM plating

R type pin

Material

p>

Steel

Surface treatment

Chromate gloss treatment

Frame connecting rod

Material

Steel

Surface treatment

Chromate treatment

Screws, nuts

Material

Steel

Surface treatment< /p>

Chromate gloss treatment

※ZAM plating: zinc-aluminum-magnesium fusion plating< /p>

Tento článek je ze sítě, nereprezentuje pozici této stanice. Uveďte prosím původ dotisku
HORNÍ