Home технология
Frame check sequence
Frame check sequence

Introduction Frame Check SequenceThe judgment process is as follows: the sending network card uses a polynomial calculation, called cyclic redundancy check (CRC), and writes the calculation result I...

Number of sectors
Number of sectors

A physical recording block on the hard disk needs three parameters to locate: cylinder number, sector number, head number. Hard disk capacity = number of cylinders × number of heads × number of sector...

Redundant bit
Redundant bit

The same algorithm for the ring redundancy code is checked.If there is an error, it needs to be retransmitted. 2. Examples of cyclic redundancy code generation and code word correctness verification....

V.90
V.90

V.90 is a 56Kbps data transmission standard formulated by the ITU (International Telecommunication Union). Through the use of compression schemes such as V.42bis, the modem can operate at a rate of 56...

Synchronous control
Synchronous control

Concept Synchronous control is in contrast to asynchronous control. The content of a synchronously controlled led display is the same as that of the display that controls the computer when publishin...

USB mobile hard disk
USB mobile hard disk

Development Overview With the popularity of computers in the home, more and more file exchanges have also occurred. How do you "move" the data in your computer at this time? It's very simple, just bu...

Analog electrical signal
Analog electrical signal

Non-electric signals (such as sound, light, etc.) are input to the converter (such as microphones, photoelectric tubes) to output continuous electrical signals, so that the frequency or amplitude of t...

Synchronization protocol
Synchronization protocol

Definition The transmission unit is a data block composed of multiple bytes or multiple bits. It is synchronized only at the beginning of the frame, and a fixed clock is maintained within the frame....

Collision detection
Collision detection

Collision detection classification Carrier Sense Multiple Access/Collision Detection (CSMA/CD)This solution requires the device to perform the channel detection while sending the frame. Listen to d...

XON
XON

Introduction XMODEM is a low-speed file transfer protocol. KERMIT is a file transfer protocol used in an asynchronous communication environment. The main difference between it and XMODEM is: KERMIT...

Graphics processing
Graphics processing

Introduction As an important part of professional articles in sci-tech journals, graphics play an important role in the professionalism and academic nature of articles. Without good graphics and gra...

EDO memory
EDO memory

Introduction to memory It cancels the time interval between the two storage cycles of the motherboard and the memory, and transmits data every 2 clock pulse cycles, which greatly shortens the access...

Working voltage
Working voltage

Introduction to working voltage The real-time working voltage of electrical equipment usually needs to be measured with the help of a multimeter, which is an unknown value. The calculation relations...

North Bridge Chip
North Bridge Chip

The synonym North Bridge chip generally refers to the North Bridge (computer motherboard north bridge chip). Features The data processing capacity of the north bridge chip is very large, and the hea...

Package form
Package form

Basic information Since Intel Corporation in the United States designed and manufactured 4-bit microprocessor chips in 1971, in more than 20 years, CPUs have evolved from Intel4004, 80286, 80386, 8...

TOP